Installing our EZ Faucet Adapter

For use with flexible hose connectors only.

1. Turn off the undersink valve to the cold water sink faucet, then remove the flexible hose at the top end (from the faucet).

2. Install the EZ connector shown at right onto the faucet stem, then attach the flexible tube to the lower connection of the EZ adapter. Be sure the washer is in place in the EZ Adapter before attaching it to the faucet.

3. Insert the tube/valve assembly supplied with the EZ adapter into the EZ Adapter. Just plug the elbow into the John Guest fitting on the side of the adapter.

4. Turn the inline valve off (at right angle with the tubing) and turn on the water to the faucet and check for leaks.

Now, install the end of free end of the 1/4" tubing into the inlet port of you water filtration unit. The inline valve is now the on/off valve for the unit.

Back to Product Index Page.