If you need help, call Pure Water Products, 940 382 3814.

For use with 3/8" flexible hose connectors only.

1. Turn off the undersink valve to the cold water sink faucet, then remove the flexible hose from the

shutoff valve.

2. Install the EZ connector shown at right onto the valve stem, then attach the flexible tubing with valve. Just push the tube in until you feel it hit bottom. Follow the example of the picture.

3. Turn the inline valve off (at right angle with the tubing) and turn on the water to the faucet and check for leaks.

Now, install the end of free end of the 1/4" tubing into the inlet port of you water filtration unit. The inline valve is now the on/off valve for the unit.