Multi-Pure Siphon Instructions

1. Install the adapter by screwing it into the 1/8" port the the Multi-Pure cartridge.

2. Submerge the cartridge in water to be filtered. Cartridge will have to be weighted in order to stay submerged.

3. Let cartridge soak until it won't float.

4. Start filter by sucking on the tube until you get water in your mouth.

5. Lower the tube to a place lower than the container and water should continue to flow.

6. Allow water to run for at least 2 hours to rinse the filter.

7. After the filter is rinsed, capture the water for use.

8. Filter will continue to operate as long as there is water in the container.