Ledge Faucets for Water Filtration Systems

Ledge faucets (spigots) for reverse osmosis units and undersink water filters.
Standard (gooseneck) and long-reach faucets in basic chrome and a variety of colors.
Both air gap and non air gap designs.

A  faucet is the most visible and accessible part of any drinking water system. It’s the part that you have intimate, daily contact with. If you don’t like the faucet, you probably won’t like the drinking water system. Choose a faucet you like. It’s an important part of the equipment.

Ledge faucets on this page are standard sized. You can easily replace your current faucet with a new one.

The faucets below all connect with 1/4" tubing, but we can provide 3/8" connectors on request.

We pay shipping on all faucet orders!

Our Selection of Ledge Faucets

Li Kuan Long Reach Non Air Gap
Part #: LF600

The Standard Faucet for our RO Units and Undersink Filters. This faucet is a very smooth operator. The spout swivels 360 degrees. The faucet has a stainless steel stem and is NSF Certified.

Height at tallest point: 8.5"
Center of base to end of tip: 6"

You won’t find a better standard-format faucet.

Part #	Description	Price
lf600	Li-Kuan Long Reach Non Air Gap	$27

Generic Long Reach (Air Gap & Non Air Gap)
Non Air Gap Part #: LF801
Air Gap Part #: LF802

An attractive, low-priced faucet. The spout swivels 360 degrees.

Height at tallest point: 8.5"
Center of base to end of tip: 6"

Part #	Description	Price
lf801	Generic Chrome Non Air Gap, Long Reach Faucet	$22
lf802	Generic Chrome Air Gap, Long Reach Faucet	$24

Chrome Quarter-Turn Ceramic Disk Faucet. Non Air Gap.
Part # : LF803

A tough but elegant “quarter turn” faucet with very smooth operation and an attractive chromed tip. Allows for adjustable flow via the quarter-turn control. Spout swivels a full 360 degrees.

Height at tallest point: 9"
Center of base to end of tip: 7"

Part #	Description	Price
lf803	Chrome Quarter-Turn Ceramic Disk Faucet. Non Air Gap.	$39

Chrome Cane Spout Faucet. Non Air Gap.
Part # : LF500

Beautiful Foundry Chrome Faucet with Extended “Cane” Spout, which swivels a full 360 degrees. Quarter-Turn, Ceramic Disk.

Height at tallest point: 10"
Center of base to end of tip: 5"

Part #	Description	Price
lf500	Chrome Cane Spout Faucet. Non Air Gap.	$36

Brushed Nickel Cane Spout Faucet. Non Air Gap.
Part # : LF501

Beautiful Foundry Brushed Nickel Faucet with Extended “Cane” Spout, which swivels a full 360 degrees.

Height at tallest point: 10"
Center of base to end of tip: 5"

Part #	Description	Price
lf501	Brushed Nickel Cane Spout Faucet. Non Air Gap.	$41

Black Cane Spout Faucet. Non Air Gap.
Part # : LF502

Foundry Black Faucet with Extended “Cane” Spout, which swivels a full 360 degrees.

Height at tallest point: 10"
Center of base to end of tip: 5"

White Cane Spout Faucet. Non Air Gap.
Part # : LF503

Foundry Black Faucet with Extended “Cane” Spout, which swivels a full 360 degrees.

Height at tallest point: 10"
Center of base to end of tip: 5"

Part #	Description	Price
lf502	Foundry Black Cane Spout Faucet. Non Air Gap.	$48
lf503	Foundry White Cane Spout Faucet. Non Air Gap.	$48

JG Faucet Connectors

Go to installation instruction page for a picture of the adapter connected to the faucet.

Prices:

---

JG026 (1/4") : $3.65

---

JG027 (3/8") : $3.95

---

We pay shipping.

Parts That Make Installation Easy

John Guest Faucet Connector

This nifty specialty part is designed to connect your faucet to a 1/4" plastic tube. Just screw it on hand tight to the faucet stem, then push the tube into the fitting. It does away with the sometimes difficult undersink compression fitting.

If you order a faucet, you do not need to order this part. It will be included.

If you want an extra for your refrigerator, or to connect a faucet you already own, order Part # : JG026 for 1/4" tubing and JG027 for 3/8" tubing. Both fit all standard faucet stems.

This handy fitting also fits the back water inlet connection of refrigerators and most in-the-wall valves behind the refrigerator.